Q206. Which electric lines connect the substation to distributors in distribution system? | वितरण प्रणाली में वितरकों के लिए सबस्टेशन को कौन सी विद्युत लाइन जोडती हैं?
(A) Feeders | फीडर
(B) Distributors | वितरक
(C) Service lines | सर्विस लाइन
(D) Service mains | सर्विस मेन
Correct Answer :- (A) Feeders | फीडर
Q207. What is the insulation resistance between any two conductors in a medium voltage domestic installation as per IE rules? | IE के नियमों के अनुसार मध्यम वोल्टेज घरेलू इंस्टॉलेशन में किन्हीं दो चालकों के बीच इन्सुलेशन प्रतिरोध क्या है?
(A) Infinity | अनन्त
(B) More than one Mega ohm | एक मेगा ओह्म से अधिक
(C) More than two Mega ohms | दो से अधिक मेगा ओह्म
(D) More than three Mega ohms | तीन मेगा ओह्म से अधिक
Correct Answer :- (B) More than one Mega ohm | एक मेगा ओह्म से अधिक
Q208. What is diversity factor (D.F)? | विविधता कारक (D.F) क्या है?
(A) DF = minimumactualload / Installedload
(B) DF = Installedload / minimumactual load
(C) DF = minimuminstalledoad / actual load
(D) DF = actual load / minimuinstalled load
Correct Answer :- (A) DF = minimumactualload / Installedload
Q209. What is the voltage ratio in A,C distribution line adopted for domestic consumers? | घरेलू उपभोक्ताओं के लिए अपनाई गई A.C वितरण लाइन में वोल्टेज अनुपात क्या है?
(A) 415 V/240 V
(B) 240 V/110 V
(C) 415 V/110 V
(D) 11 KV/415 V
Correct Answer :- (A) 415 V/240 V
Q210. What is the name of the insulator used in O.H lines? | ओ.एच लाइनों में उपयोग किए जाने वाले इन्सुलेटर का नाम क्या है?
(A) Pin insulator | पिन इंसुलेटर
(B) Post insulator | पोस्ट इंसुलेटर
(C) Strain insulator | स्ट्रेन इंसुलेटर
(D) Shackle insulator | शैकल इंसुलेटर
Correct Answer :- (D) Shackle insulator | शैकल इंसुलेटर
Q211. What is the name of line insulator? | लाइन इन्सुलेटर का नाम क्या है?
(A) Pin type insulator | पिन प्रकार इन्सुलेटर
(B) Disc type insulator | डिस्क प्रकार इन्सुलेटर
(C) Shackle type insulator | शैकल प्रकार इन्सुलेटर
(D) Suspension type insulator | निलंबन प्रकार इन्सुलेटर
Correct Answer :- (D) Suspension type insulator | निलंबन प्रकार इन्सुलेटर
Q212. Which is the permissible load for lighting sub circuit in domestic wiring as per IE rules? | IE नियमर्मा के अनुसार घरेलू वायरिंग में उप सर्किट को जलाने के लिए अनुमेय भार कौन सा है?
(A) 800 W
(B) 1200 W
(C) 2400 W
(D) 3000 W
Correct Answer :- (A) 800 W
Q213. What is the name of the insulator? | इन्सुलेटर का नाम क्या है?
(A) Stay insulator | स्टे इंसुलेटर
(B) Shackle insulator | शैकल इंसुलेटर
(C) Suspension insulator | निलंबन इन्सुलेटर
(D) Single shed pin insulator | सिंगल शेड पिन इंसुलेटर
Correct Answer :- (D) Single shed pin insulator | सिंगल शेड पिन इंसुलेटर
Q214. What is the reason for the conductor cross-sectional area can fully utilised on transmission of DC as compared to AC? | क्या कारण है, जो एसी की तुलना में डीसी के ट्रांसमिशन पर कंडक्टर क्रॉस सेक्शनल क्षेत्र का पूरी तरह से उपयोग कर सकता है?
(A) No heat loss | कोई ऊष्मीय हानि नहीं
(B) No skin effect | कोई त्वचा प्रभाव नहीं
(C) No power loss | कोई शक्ति हानि नहीं
(D) No corona loss | कोई कोरोना हानि नहीं
Correct Answer :- (B) No skin effect | कोई त्वचा प्रभाव नहीं
Q215. Why the disc pin insulators outer surface is made by glazing and bent the sides inward? | डिस्क पिन इंसुलेटर बाहरी सतह को ग्लेज़िंग द्वारा क्यों बनाया गया है और किनारों को अंदर की तरफ क्यों झुका रहा है?
(A) To withstand high voltage | उच्च वोल्टेज का सामना करने के लिए
(B) Not to attract birds to sit on it | इस पर बैठने के लिए पक्षियों को आकर्षित करने के लिए नहीं
(C) To offer high mechanical strength | उच्च यांत्रिक शक्ति प्रदान करने के लिए
(D) Disables continuous water flow in rainy season | वर्षा ऋतु में निरंतर जल प्रवाह को निष्क्रिय करता है
Correct Answer :- (D) Disables continuous water flow in rainy season | वर्षा ऋतु में निरंतर जल प्रवाह को निष्क्रिय करता है
Q216. What is the type of over head line joint? | ओवर हेड लाइन संयुक्त का प्रकार क्या है?
(A) Twisted joint | मुड़ा हुआ जोड़
(B) Straight sleeve joint | सीधे आस्तीन का जोड
(C) Compression joint for ACSR | ACSR के लिए संयुक्त संपीड़न
(D) Straight joint through connectors | कनेक्टर्स के माध्यम से सीधे जोड
Correct Answer :- (C) Compression joint for ACSR | ACSR के लिए संयुक्त संपीड़न
Q217. Why steel is reinforced in ACSR conductors used for overhead lines? | ओवरहेड लाइन के लिए इस्तेमाल होने वाले ACSR कंडक्टर में स्टील को क्यों प्रबलित किया जाता है?
(A) To minimize the line sag | लाइन सँग को कम करने के लिए
(B) To reduce the line voltage drop | लाइन वोल्टेज ड्रॉप को कम करने के लिए
(C) To increase the tensile strength | तन्यता बढ़ाने के लिए
(D) To increase the current carrying capacity | धारा वहन क्षमता को बढ़ाने के लिए
Correct Answer :- (C) To increase the tensile strength | तन्यता बढ़ाने के लिए
Q218. Which type of A.C transmission is universally adopted? | किस प्रकार का A.C प्रसारण सार्वभौमिक रूप से अपनाया जाता है?
(A) Two phase four wire | दो फेज़ चार तार
(B) Two phase three wire | दो फेज़ तीन तार
(C) Single phase two wire | सिंगल फेज दो तार
(D) Three phase three wire | तीन फेज़ तीन तार
Correct Answer :- (D) Three phase three wire | तीन फेज़ तीन तार
Q219. Which type of line insulator is used for terminating on corner post? | लाइन समाप्ति पर कोने के खम्भे के लिए किस प्रकार के लाइन इन्सुलेटर का उपयोग किया जाता है?
(A) Pin insulator | पिन इंसुलेटर
(B) Strain insulator | स्ट्रेन इंसुलेटर
(C) Shackle insulator | शैकल इंसुलेटर
(D) Suspension insulator | निलंबन इन्सुलेटर
Correct Answer :- (C) Shackle insulator | शैकल इंसुलेटर
Q220. What is the reason of keeping binding wire gap too close and very tight in pin insulator? | बाइंडिंग वायर गैप को बहुत पास रखने और पिन इंसुलेटर में बहुत टाइट होने का क्या कारण है?
(A) Avold sparking | स्पार्किंग से बचें
(B) Avoid corrosion | क्षरण से बचें
(C) Avoid oxide formation | ऑक्साइड बनाने से बचें
(D) Avoid atmospheric pressure | वायुमंडलीय दबाव से बचें
Correct Answer :- (A) Avold sparking | स्पार्किंग से बचें
Q221. What is the name of conductor used on overhead lines? | ओवरहेड लाइनों पर उपयोग कि जाने वाले कंडक्टर का नाम क्या है?
(A) ACSR
(B) Aluminium | अल्युमीनियम
(C) Galvanised iron | जस्तीकृत लोहा
(D) Hard drawn copper | कठोर ताँबा
Correct Answer :- (A) ACSR
Q222. What is the main purpose of crossarm used in electric poles? | विद्युत खंभे में प्रयुक्त क्रॉसआर्म का मुख्य उद्देश्य क्या है?
(A) Supporting the line conductors | लाइन कंडक्टरों का सहारा देना
(B) Holding the insulators on overhead line | ओवरहेड लाइन पर इन्सुलेटर पकड़ना
(C) Avoids short circuit between conductors | कंडक्टरों के बीच शॉर्ट सर्किट से बचा जाता है
(D) Reduces conductor sag between supports | सहारे के बीच कंडक्टर शिथिलता को कम करता है
Correct Answer :- (B) Holding the insulators on overhead line | ओवरहेड लाइन पर इन्सुलेटर पकड़ना
Q223. Which type of line insulator is used at the dead ends of the H.T overhead lines? | H.T ओवरहेड लाइनों के अंतिम सिरों पर किस प्रकार के लाइन इंसुलेटर का उपयोग किया जाता है?
(A) Pin insulator | पिन इंसुलेटर
(B) Disc insulator | डिस्क इंसुलेटर
(C) Stay insulator | स्टे इंसुलेटर
(D) Post insulator | पोस्ट इंसुलेटर
Correct Answer :- (B) Disc insulator | डिस्क इंसुलेटर
Q224. What is the advantage of AC power transmission? | AC पॉवर ट्रांसमिशन का क्या फायदा है?
(A) Corona loss negligible | कोरोना नुकसान नगण्य
(B) Stress on transmission lines is minimum | ट्रांसमिशन लाइनों पर तनाव न्यूनतम है
(C) Low voltage drop in transmission lines | ट्रांसमिशन लाइनों में कम वोल्टेज ड्रॉप
(D) Voltages can be stepped up and stepped down easily | वोल्टेज को स्टेप अप किया जा सकता है और आसानी स्टेप डाउन किया जा सकता है
Correct Answer :- (D) Voltages can be stepped up and stepped down easily | वोल्टेज को स्टेप अप किया जा सकता है और आसानी स्टेप डाउन किया जा सकता है
Q225. What is ACSR stands for? | ACSR का मतलब क्या है?
(A) All Conductors Steel Reinforced
(B) Aluminium Core Steel Reinforced
(C) Aluminium Covered Steel Reinforced
(D) Aluminium Conductor Steel Reinforced
Correct Answer :- (D) Aluminium Conductor Steel Reinforced
Q226. What is the purpose of cross-arm in O.H lines? | ओ.एच लाइनों में क्रॉस-आर्म का उद्देश्य क्या है?
(A) Provide more support to the O.H pole | ओ.एच. पोल को अधिक सहारा प्रदान करें
(B) Protect from short between conductors | कंडक्टरों के बीच लघुपथन से रक्षा करें
(C) Reduce the sag of the lines between poles | खम्भों के बीच की रेखाओं की शिथिलता को कम करें
(D) Holding the insulators where the conductors are fastened | इंसुलेटर पकड़े हुए कंडक्टरों को किधर से जकड़ना
Correct Answer :- (D) Holding the insulators where the conductors are fastened | इंसुलेटर पकड़े हुए कंडक्टरों को किधर से जकड़ना
Q227. What is the advantage of overhead lines compared to underground cable? | भूमिगत केबल की तुलना में ओवर हेड लाइनों का क्या फायदा है?
(A) Public safety is more | सार्वजनिक सुरक्षा अधिक है
(B) Faults can be located easily | दोष आसानी से पला लगाये जा सकते हैं
(C) No interference with the communication lines | संचार लाइनों के साथ कोई हस्तक्षेप नहीं
(D) Not liable to the hazards from lightning discharges | तड़ित निरावेश से खतरों के लिए विश्वसनीय नहीं है
Correct Answer :- (B) Faults can be located easily | दोष आसानी से पला लगाये जा सकते हैं
Q228. Which substation the transmission line voltage is stepped down to consumer supply voltage? | ट्रांसमिशन लाइन वोल्टेज को किस स्थान पर उपभोक्ता आपूर्ति वोल्टेज में ले जाया जाता है?
(A) Mobile substation | मोबाइल सबस्टेशन
(B) Mining substation | खनन सबस्टेशन
(C) Secondary substation | माध्यमिक सबस्टेशन
(D) Distribution substation | वितरण सबस्टेशन
Correct Answer :- (D) Distribution substation | वितरण सबस्टेशन
Q229. What will happen to the string arrangement of disc insulators, if one of the disc insulator gets damaged ? | यदि डिस्क इन्सुलेटर क्षतिग्रस्त हो जाता है, तो डिस्क इंसुलेटर की स्ट्रिंग व्यवस्था का क्या होगा?
(A) Whole string become useless | पूरा तार बेकार हो जाता है
(B) No effect operates normally | कोई भी प्रभाव नहीं, सामान्य रूप से संचालित होता है
(C) Only the damaged disc will not function | केवल क्षतिग्रस्त डिस्क कार्य नहीं करेगी
(D) Darnaged insulator and the adjacent insulator will not function | समीपवर्ती इन्सुलेटर और आसन्न इन्सुलेटर कार्य नहीं करेगा
Correct Answer :- (C) Only the damaged disc will not function | केवल क्षतिग्रस्त डिस्क कार्य नहीं करेगी
Q230. How the sparking on the aluminium cored conductors binding joints can be prevented? | जोड़ों को बांधने वाले एल्यूमीनियम क्रोड़ वाले कंडक्टरों पर स्पार्किंग को कैसे रोका जा सकता है?
(A) Keeping binding turns very close | बाँधने वाले घुमावों को पास-पास रखना
(B) Making binding turns very tight | बाँधने वाले घुमावों को कसकर रखना
(C) Providing guard wires below the conductors | कंडक्टरों के नीचे गार्ड तारों को प्रदान करना
(D) Providing more than one binding | एक से अधिक बंधन प्रदान करना
Correct Answer :- (B) Making binding turns very tight | बाँधने वाले घुमावों को कसकर रखना
Q231. What will happen to the skin effect on the O.H conductors, if the conductor diameter is small (<1cm)? | ओएच कंडक्टरों पर त्वचा के प्रभाव का क्या होगा, अगर कंडक्टर का व्यास छोटा है (<1cm)?
(A) Becomes negligible | नगण्य हो जाता है
(B) Increases to maximum | अधिकतम तक बढ़ जाता है
(C) No effect, remain same | कोई असर नहीं, वही रहता है
(D) Decreases half of the value | मान का आधा घट जाता है
Correct Answer :- (A) Becomes negligible | नगण्य हो जाता है