Module No.-03 : Wires, Joints, Soldering, Underground Cables ( वायर्स, जॉइन्ट्स, सोल्डरिंग, भूमिगत केबल ) QB

Join whatsapp group Join Now
Join Telegram group Join Now
Youtube Channel Subscribe Now

Module No. 3. wires, Joints, Soldering, Underground Cables  ( वायर्स, जॉइंट्स, सोल्डरिंग, भूमिगत केबल ) महत्वपूर्ण विषयों के प्रश्न पढ़ने के बाद अगर आप सभी को मॉक टेस्ट देना है, तो विशेष दिए गए लिंक पर क्लिक करें और अपना ज्ञान परीक्षण करें।”

Q1. What is the current carrying capacity of 32 amp.rated cable, if it is protected by the rewirable fuse? | 32 एम्पीयर रेटेड केबल की धारा वहन क्षमता क्या है, यदि यह रीवायरेबल फ्यूज द्वारा संरक्षित है?
 

Correct Answer :-(C) 26 Amp | 26 एम्पीयर

Q2. What is the possible range to measure the size of the wire in a Standard Wire Gauge (SWG)? | मानक तार गेज (एसडब्ल्यूजी) में तार के आकार को मापने के लिए संभावित सीमा क्या है?
 

Correct Answer :-(D) 0-36

Q3. What is the name of the wire joint? | इस तार जोड़ का क्या नाम है?
 

Correct Answer :-(B) Knotted tap joint | नॉटेड टैप जोड़

Q4. Which type of soldering flux is used for soldering galvanised iron? | गैल्वेनीकृत लोहे के लिए किस प्रकार के सोल्डरिंग फ्लक्स का उपयोग किया जाता है?
 

Correct Answer :-(D) Hydrochloric acid | हाइड्रोक्लोरिक अम्ल

Q5. Which method of soldering is used for quantity production and for tinning work? | मात्रा उत्पादन और टिनिंग कार्य के लिए सोल्डरिंग की किस विधि का उपयोग किया जाता है?
 

Correct Answer :-(A) Dip soldering | डीप सोल्डरिंग

Q6. What is the name of the part marked as ‘X’ in the underground (UG) cable? | अंडर ग्राउंड (UG) केबल में ‘X’ के रूप में चिह्नित भाग का नाम क्या है?
 

Correct Answer :-(A) Bedding | बेडिंग

Q7. What is the full form of XLPE Cable? | XLPE केबल का पूर्ण रूप है
 

Correct Answer :-(B) X ess Line Phase Earthing

Q8. What is the purpose of ‘serving’ layers in underground cable? | भूमिगत केबल में सर्विंग परत का क्या उपयोग है?
 

Correct Answer :-(D) Protect armouring from atmospheric condition | आर्मरिंग को वायुमंडलीय स्थिति से बचाना

Q9. Which type of fault of U.G. Cable csnbe located by this loop test? | लूप टेस्ट में भूमिगत केबल के किस प्रकार के दोष के स्थान को ज्ञात किया जा सकता है ?
 

Correct Answer :-(B) Short circuit fault | लघु परिपथ दोष 

Q10.Which cable laying method is used in generating station?
जनरेशन स्टेशन में किस केबल बिछाने की विधि का प्रयोग किया जाता है?|
 

Correct Answer :-(B) Racks in air | हवा में रैक 

Q11. How many electrons are there in the valence shell of a copper atom? | तांबे के परमाणु के आबंध चक्र में कितने इलेक्ट्रान होते हैं?
 

Correct Answer :-

Q12. What is the effect of electric current on neon lamp? | नियॉन लैंप पर विद्युत धारा का क्या प्रभाव पड़ता है?
 

Correct Answer :-

Q13. What is the unit of insulation resistance? | कुचालक प्रतिरोध की इकाई क्या है?
 

Correct Answer :-

Q14. Which electrical device is the coarse excess current protection? | कौन सा विद्युत उपकरण अधिक अतिरिक्त धारा संरक्षण है?
 

Correct Answer :-

Q15. Which type of joint is used for extending the length of conductor in overhead lines? | ओवर हेड लाइनों में कंडक्टर की लंबाई बढ़ाने के लिए किस प्रकार के जोड़ का उपयोग किया जाता है?
 

Correct Answer :-

Q16. Which type of soldering flux is used for soldering aluminium conductors? | एल्युमीनियम चालकों को सोल्डर करने के लिए किस प्रकार के सोल्डरिंग फ्लक्स का प्रयोग किया जाता है?
 

Correct Answer :-

Q17. What is the effect on molten solder due to repeated melting ? | पिघले हुए सोल्डर को बार-बार पिघलाने से क्या  प्रभाव पड़ता है?
 

Correct Answer :-(A) Tin content reduced | टिन का भाग कम हो जाता है 

18. What will happen to PVC insulation in cable carries excess current continuously for a long period? | केबल के PVC कुचालक का क्या होगा, यदि अत्यधिक धारा लम्बे समय तक बहती रहे?
 

Correct Answer :-

Q19. Which method of cable laying is suitable for congested areas? | केबल बिछाने की कौन सी विधि संकीर्ण क्षेत्रों हेतु उपयुक्त है?
 

Correct Answer :-

Q20. What is the name of the part marked ‘X’ in UG cables? | यूजी केबल्स में ‘X’ चिह्नित भाग का नाम बताइए?
 

Correct Answer :-

Q21. Which type of fault of U.G Cable is identified in the circuit? | भूमिगत केबल में किस प्रकार के दोष का पता लगाया जा सकता है?
 

Correct Answer :-

Q22. Which part of the underground cable is protecting the metallic sheath against corrosion? | भूमिगत केबल में कौन सा भाग धात्वीय कवच को क्षरण से बचाता है?
 

Correct Answer :-

Q23. Why the soldering iron must be kept into a stand that not in use while soldering? | सोल्डरिंग आयरन को उपयोग न करने के समय स्टैंड में क्यों रखना चाहिए?

(A) It prevents burns and fire | यह जलने एवं अग्नि को रोकता है
(B) To control the excessive heat | अतिरिक्त ऊष्मा को नियंत्रित करने हेतु
(C) To save the time of soldering process |सोल्डरिंग प्रक्रिया का समय बचाने हेतु
(D) To save the operator from electric shock |संचालक को विद्युत झटके से बचाने हेतु

 

Correct Answer :-

Q24. Which type of wire joint is found in the junction box? | जंक्शन बॉक्स में किस प्रकार के तारों के जोड़ पाए जाते हैं?

(A) Aerial tap joint | एरिएल टैप जोड़
(B) Plain tap joint | सीधे टैप जोड़
(C) Rat tail joint | रैट टेल जोड़
(D) Married joint | मैरिड जोड़

 

Correct Answer :-

Q25. What is the name of the joint? | इस जोड़ का क्या नाम है?
 

Correct Answer :-

Q26. What is the use of Britannia T joint? | ब्रिटानिया T जोड़ का क्या उपयोग है?
 

Correct Answer :-

Q27. Which type of soldering method is used for servicing and repairing work? | सर्विसिंग और रिपेयरिंग कार्य के लिए किस प्रकार की सोल्डरिंग विधि प्रयोग की जाती है?
(A) Dip soldering | डिप सोल्डरिंग
(B) Soldering with a flame | ज्वाला के साथ सोल्डरिंग
(C) Soldering with soldering gun | सोल्डरिंग गन के साथ सोल्डरिंग
(D) Soldering with a soldering iron | सोल्डरिंग
आयरन के साथ सोल्डरिंग
 

Correct Answer :- (C) Soldering with soldering gun | सोल्डरिंग गन के साथ सोल्डरिंग

Q28. What is the use of dip soldering method? | डिप सोल्डरिंग विधि का उपयोग क्या है?
(A) Soft soldering | नर्म सोल्डरिंग
(B) Piping and cable soldering work | पाइपिंग और केबल सोल्डरिंग कार्य
(C) Soldering miniature components on PCB | पीसीबी में छोटे भागों की सोल्डरिंग
(D) Soldering sensitive electric components | संवेदनशील विद्युत भागों की सोल्डरिंग
 

Correct Answer :- (C) Soldering miniature components on PCB | पीसीबी में छोटे भागों की सोल्डरिंग

Q29. Name the part marked X of belted U.G cable. | बेल्टेड भूमिगत केबल में X से इंगित भाग का नाम बताइए
 

Correct Answer :-

Q30. Which insulating material is used as hot pouring compound for making joints in underground cable? | कौन सा कुचालक पदार्थ भूमिगत केबल में गर्म यौगिक की तरह डाला जाता है?

(A) Polyamine hardener | पॉली अमीन हार्डनर
(B) Cast resin compound | कास्ट रेसिन यौगिक
(C) Bituminous compound | बिटुमिनस यौगिक
(D) Epoxy cast resin compound | एपॉक्सी कास्ट रेसिन यौगिक

 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q31. What is the purpose of bedding insulation of U.G. cable? | भूमिगत केबल में बेडिंग का क्या उद्देश्य है?

(A) Protect the cable from mechanical injury | केबल को यांत्रिक क्षति से बचाना
(B) Protect the cable from moisture and gases |केबल को नमी एवं गैस से बचाना
(C) Protect armouring from atmospheric condition | आर्मरिंग को वायुमंडलीय स्थितियों से बचाना
(D) Protect the metallic sheath against corrosion |धात्विक कवच को क्षरण से बचाना

 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q32. Which test is conducted to locate the fault in  U.G Cable? | भूमिगत केबल में किस प्रकार के दोष को ज्ञात किया सकता है?
 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q33. What does the number 1.40 represent if a stranded conductor is designated as 7/1.40? | यदि एक हुए चालक को 7/1.40 से इंगित किया जाता है, तो 1.40 क्या दर्शाता है?

(A) Area of cross section | अनुप्रस्थ काट का क्षेत्रफल
(B) Radius of one conductor | एक चालक की त्रिज्या
(C) Diameter of all conductor | सभी चालकों का व्यास
(D) Diameter of each conductor | प्रत्येक चालक का व्यास

 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q34. What is the value of electrical conductivity of aluminium conductor? | एल्युमीनियम चालक की चालकता का क्या मान है?

(A) 61 mho/m
(B) 56 mho/m
(C) 35 mho/m
(D) 28 mho/m

 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q35. What is the rating factor of cable provided with coarse excess current protection? | केबल की अधिक अतिरिक्त धारा सुरक्षा के लिए धारा रेटिंग कारक क्या है?

(A) 1.11
(B) 1.23
(C) 0.81
(D) 0.707

 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q36. What is the size of neutral conductor compared to phase conductor in U.G cable? | भूमिगत केबल में उदासीन चालक का आकार फेज़ चालक की तुलना में

(A) Same size of phase conductor | फेज़ चालक के समान
(B) Half size of phase conductor | फेज़ चालक से आधा
(C) 1/4 size of phase conductor | फेज़ चालक का एक चौथाई
(D) 1/3 size of phase conductor | फेज़ चालक का एक तिहाई

 

Correct Answer :-(A) Loop test | लूप टेस्ट 

Q37. What is the name of the tool? | इस औजार का क्या नाम है?
 

Correct Answer :-

Q38. Which type of joint is used in over head lines
for high tensile strength? उच्च्य तन्यता हेतु शिरोपरि लाइन में कौन सा जोड़ 
उपयोग किया जाता है?
 

Correct Answer :- (C) Western union joint | वेस्टर्न यूनियन जोड़ 

Q39. What is the reading of the micrometer? | माइक्रोमीटर का पाठ्यांक क्या है?
 

Correct Answer :-

Q40. Which method of soldering is used for repairing the vehicle body? | वाहनों की बॉडी के सुधार हेतु सोल्डरिंग की कौन सी विधि प्रयोग की जाती है?
 

Correct Answer :-

Q41. What is the advantage of stranded conductor over solid conductor? | गुथे हुए चालक का ठोस चालक की तुलना में क्या लाभ है?

More insulation resistance | अधिक कुचालक

प्रतिरोध

 

Correct Answer :-

Q42.What is the current capacity of the 16 Amp. Cable, if it is protected by coarse excess current protection? | 16 A केबल की धारा क्षमता क्या है, यदि यह अधिक अतिरिक्त धारा सुरक्षा द्वारा संरक्षित है?
(A) 11 A
(B) 13 A
(C) 15 A
(D) 18 A
 

Correct Answer :- (B) 13 A

Q43. What is the unit for Quantity of electricity? | बिजली की मात्रा के लिए इकाई क्या है?
 

Correct Answer :-

Q44. What is the name of the soldering method? | सोल्डरिंग विधि का क्या नाम है?
 

Correct Answer :-

Q45. What formula is used to find Electro Motive Force (EMF)? । विद्युत वाहक बल ज्ञात करने हेतु किस सूत्र का उपयोग किया जाता है?
(A) EMF = Potential difference – voltage drop | EMF = विभवान्तर-वोल्टेज पात
(B) EMF = Potential difference + voltage drop | EMF = विभवान्तर+वोल्टेज पात
(C) EMF = Potential difference + voltage drop/2 | EMF = विभवान्तर+वोल्टेज पात/2
(D) EMF = Potential difference + 2 x voltage drop | EMF = विभवान्तर+ 2 x वोल्टेज पात
 

Correct Answer :-(B) EMF = Potential difference + voltage drop | EMF = विभवान्तर+वोल्टेज पात

Q46. What is the current rating factor for close excess current protection of cable? | केबल की पास की अतिरिक्त धारा सुरक्षा के लिए धारा रेटिंग कारक क्या है?
(A) 0.81
(B) 0.92
(C) 1.23
(D) 1.5
 

Correct Answer :(C) 1.23

Q47.What is the disadvantage of solid conductor compared to stranded conductor? | ठोस चालक की गुथे हुए चालक की तुलना में क्या हानि है?
(A) Less rigidity | कम कठोरता
(B) Less flexibility | कम लचीलापन
(C) Low melting point | कम गलनांक
(D) Low mechanical strength | कम यांत्रिक शक्ति
 

Correct Answer :-(B) Less flexibility | कम लचीलापन

Q48. What is the name of the soldering method? | सोल्डरिंग विधि का क्या नाम है?
 

Correct Answer :-

Q49. What is the cause for cold solder defect in soldering? | सोल्डरिंग में ठंडे सोल्डर दोष का कारण क्या है?
High wattage soldering iron | उच्च वाट

सोल्डरिंग आयरन

 

Correct Answer :-(B) Insufficient heating | अपर्याप्त ऊष्मन

Q50. What happens to the voltmeter if it is connected as an ammeter? | क्या होता है, यदि वोल्टमीटर को अमीटर की तरह जोडा जाए?
 

Correct Answer :-

Q51. Which is the example for coarse excess current protection? | अधिक अतिरिक्त धरा सुरक्षा हेतु क्या उदाहरण है|
 

Correct Answer :-(D) Rewireable type fuse unit | पुनः टार बांधने योगी फ्यूज  इकाई 

Q52. Which conductors are used for distribution lines? | विस्तार लाईनों के लिए कौन-सा कन्डक्टर उपयोग होता है?
 

Correct Answer :-

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top